Powerwerks PW505BT 50W Tower PA with Bluetooth

The Powerwerks PW505BT 50W Tower PA with Bluetooth features a new, sleek design and comes packed with features to deliver clear, high-quality sound.

Key Features

• Lightweight and Portable: Easy to carry and transport, making it ideal for events on the go.
  
• Multiple Inputs and Outputs: Connect your microphone, musical instruments, or other audio devices with a variety of input options. Phantom power is also included for condenser microphones. Balanced XLR outputs ensure a clean signal for connecting to mixers or speakers.
  
• High-Fidelity Sound: Dual 5-inch speakers with a high frequency driver deliver a wide range of sound, perfect for both music and speech.
  
• Bluetooth Connectivity (Optional): Stream music or audio wirelessly from your smartphone or other devices (available on select models).
  
• Expandability: The POWERLINK input allows you to easily connect additional speakers for a larger sound system.

Technical Specifications

Output Power 1%
50W, 8 Ohm load
Accepted Inputs
Channels 1 and 2: Mic XLR Balanced, Line level 1/4" Un-balanced
Channel 3: 1/8” Stereo Line Level
Hum & Noise
-65dB: Residual Noise, all level controls 0% (minimum)
-48dB: Nominal System Noise, all level controls at 50%
System Gain (Measurements made at 1kHz)
+70dB: Mic to Speaker Output (CH 1 & 2)
+56dB: Line to Speaker Output (CH 1 & 2)
+42dB: AUX IN to Speaker Output
Channel EQ (high, low)
42kHz and above, 800Hz and below
POWERLINK (In and Out)
Both jacks accept a balanced input and sends a pre-master volume output mix of channels. Recommended use: Linking two PW50BT units together.
Subwoofer Out
Line Out 20Hz-150Hz.
Phantom Power
+15V Mic inputs (Ch 1 & 2)
Power Requirements
USA/Canada 120VAC/60Hz, 80W nominal
Speakers
Two 5" 25W 16 Ohm each
Horn
3.5" Prezo Driver
Power Capacity
50W RMS
Frequency Response
60HZ-20kHz: Full range (subwoofer jack not used)
150HZ-20kHz: Crossover Active (1/4" mono plug in subwoofer jack)
Nominal Impedance
8 Ohms Not designed for external speakers
Bluetooth Module Features
Bluetooth 3.0+EDR compliant. Typical +2dBm Class 2 output power.
Audio DAC: 94dB SNR.A2DP profile support.
Dimensions & Weight
mm/kg: 192 W x 478 H x 185 D / 7.2 kg
Inches/Pounds: 7.6 W x 18.8 H x 7.3 D / 16 lb